Cordex 1KW integrated 19" or 23" shelf systems with distribution is ideal for applications with lower power requirements.
A compact 4RU design allows five rectifiers plus controller or six rectifiers per 19" shelf for bulk power needs.
SALIENT FEATURES
Convection cooled 4RU module.
Power limiting and wide range AC input.
19" or 23" shelf mountable, 4 units and 5 units across
respectively
Active power factor correction >0.99
High efficiency: 92%
Current share bus allows plug-and-play without adjustment
Hot swappable
Weight 3.0 kg
UL, CSA, IEC certified, certified according to UL 60950-1 1st
edition, CSA C22.2, IEC650950-
Specifications
INPUT SPECIFICATIONS
Input voltage range
Input frequency
Power factor
Input connections
OUTPUT SPECIFICATIONS
Output voltage range
Factory setting
Output current
Output power
Line Regulation
Load Regulation
Wide band noise
Psophometric noise
Output connections
GENERAL CHARACTERISTICS
Efficiency
EMI
Operating temperature
Storage
Humidity
Heat dissipation
Alarms
Cooling
Adjustment
(via CXC Controller)
Protection
Dimensions (HxWxD)
176-320Vac(output power 1KW)
150- 176Vac(derated to 75%)
45-66 Hz
>99%
Dual feed terminal blocks
4- 6mm² (12- 10AWG)
40.5-58VDC
54.5V
18.5A @ 54VDC ( 20.8A maximum)
1000W continuous /module
Static<±0.1%
Dynamic <±1% for any change within rated
limits
Static<±0.5%
Dynamic <±1% for 10-90% load step
2ms recovery time
<5mVrms
< 100mVp-p
<1.0mV
¼” studs on 5/8 “ centers
>92%
EN55022 class “B”
-40 - 50°C (-40 - 122°F)
(power derated upto 70°C/158°F)
-40 - 85°C (-40 - 185°F)
0- 95%RH non-condensing
<295BTU per hour
Ac mains OK – green LED
Module OK- green LED
Module alarm—red LED
Natural convection
Float and equalize voltage
Battery test voltage
High voltage shutdown
High and low voltage alarms
Current limit
Start delay time
Slope%
Current limit/short circuit
Input /output fuses
Output high voltage shutdown
Output power limiting
Thermal foldback/shutdown
Input transient
AC low line foldback/ shutdown
AC high voltage shutdown
6.9" (177mm) x 2.8" (71mm) x 9.8" (250mm)
Products & Solutions
Power Interface system
Power Interface system is integrated unit of all functional blocks of BTS site. It is a complete stand-alone BTS site manager.
Telecom Inverters
Our sleek design are parallel operable and redundant telecom inverters facilitates telecommunication and industrial power demands and provide ultimate flexibility for your current and future requirements.
GSM & CDMA Repeaters
We offer complete
range of GSM & CDMA Repeaters, Tower Mount Boosters (TMB) & Tower Mount Amplifiers (TMA).
Telecom Rectifier
We offer full range of Telecom Rectifiers from272W to 350KW Rectifier systems for all Telecommunications need.
All our products are specially designed to work in harsh working conditions, such as wide voltage fluctuations often encountered in developing countries.
