3rd Floor- Society of Nigerian Engineers Building, No.1, Engineering Close,
Off Idowo Taylor Street,
Victoria Island, Lagos (Nigeria) GSM : +2348053948340; +23408020969082 Email : sales@bsmcpowernigeria.com
BSMC Power Nigeria Limited
Specialized in Supply, Installation, Commissioning & Maintenance of :
The BSM I Series inverters provide the ideal solution for
telecom, IT and industrial applications. Due to innovative technology solutions like the patent-pending Compact
Coil, the BSM I Series inverters pack 1500W of power nto
a
light (5.6 Kg) and compact package that is 19" rack mountable
and only 1 U height. There are four models for different
input (24Vdc and 48Vdc) and output (115Vac and
230Vac) voltage combinations. The integrated controller along with the optional internal Static Transfer Switch
(STS) enable flexible and scalable systems that are truly
plug and play with no external subsystems needed
just stack the inverters up to the power level
required by the application. The inverter can be configured
for generating a 3-phase voltage source.
The electrical performance of the BSM I Series Inverter
products is at the top of the market with efficiency that
peaks at 93%, and a patent-pending control algorithm
that compensates current harmonics on the Dc side
without using bulky and expensive filters. The inverter
includes an on-board powerful DSP (Digital Signal Processor)
that allows easy programmability of the main
parameters on the LCD display and keypad on the front
panel. The BSM I Series inverters can be interfaced with
RS-485.
SALIENT FEATURES
New, compact design: 1U height x 19" width x 14.94" depth,
19" rack mountable.
High efficiency: up to
93%.
True Sine Wave output.
Paralleable output with
current share and synchronization of multiple
inverters working in parallel.
LCD display on the
front panel to monitor and set the main
parameters.
RS-485 serial link
Constant input current
sink from battery for extended life.
Over temperature Protection: Visual and acoustic indication 5°C before
Shutdown: at Tamb > 65°C and at Tint > 100°C
Protection Restore Modes:
the restore mode of each protection
Signals and Controls
LCD Panel: 2 line LCD panel with keypad for menu navigation
LED Indicator: 4, Front panel green LED indicates power supply ON.
Front panel red LED indicates generic fault; OT; fan fail;
input OV, UV,OC; output OV, UV, OC
General Alarm Signal: By a photo-relay (open if in fault mode)
Safety & Environmental
Operating Temperature Range
Full Load: -25 to 55°C
Power Derating: 75W/°C: +55 to 65°C
Storage: -40 °C to +85 °C
Operating Humidity: Maximum 90% non-condensing
Altitude: Operating: 13,000 feet
Non-operating: 40,000 feet
Output Voltage Temperature Coefficient: 0.02% per °C within rated load
Safety Agency Compliance: CSA, Kema, CB report, CE mark
Isolation
PRI-SEC: 3000 Vrms PRI-GND: 1000 Vrms
SEC-GND: 1500 Vrms Signal-GND: 0 Vrms
Mechanical Specifications
Size: 19” W x 1.71” H x 14.94” L
(482.6mm x 43.5mm x 379.5mm)
Weight: 12.34 lb (5.6 Kg)
MTBF: 250,000 hours calculated at 40°C
Products & Solutions
Power Interface system
Power Interface system is integrated unit of all functional blocks of BTS site. It is a complete stand-alone BTS site manager.
Telecom Inverters
Our sleek design are parallel operable and redundant telecom inverters facilitates telecommunication and industrial power demands and provide ultimate flexibility for your current and future requirements.
GSM & CDMA Repeaters
We offer complete
range of GSM & CDMA Repeaters, Tower Mount Boosters (TMB) & Tower Mount Amplifiers (TMA).
Telecom Rectifier
We offer full range of Telecom Rectifiers from272W to 350KW Rectifier systems for all Telecommunications need.
All our products are specially designed to work in harsh working conditions, such as wide voltage fluctuations often encountered in developing countries.
